8:00am - 1:00pm | The 7 stages of rotational moulding | Dr Gareth McDowell, 493k Limited

KNOWLEDGE IS POWER.  Dr Gareth will be giving a very useful seminar on the “7 Stages of Rotational Moulding”. Take a journey through the roto-moulding cycle.  From the initial heating of the powder to the post release cooling.  Dr. Gareth’s seminar is designed to help you to understand and ensure you get the most from each and every stage.  You are invited to join him in recognising and understanding the importance of each stage and how it can affect your production process, your parts and ultimately your PROFIT.  

As always, Dr Gareth will not allow anyone to sleep at the back of the room while he imparts his knowledge on polyethylene, temperature monitoring and a variety of Rotomoulding knowledge. He will also be bringing his world-famous RotoRocket benchtop machine along and if everyone is well behaved they might see it in action. Of course, there will be plenty of opportunities for questions, where everyone can benefit from the answers provided by this Rotomoulding expert with over 20 years' experience.

Don’t miss out on the ability to TAKE CONTROL of your moulding when you fully understand the 7 Stages of Rotational Moulding.

---

OPTIONAL WORKSHOP @ $440.00 INCLUDING GST PER PERSON

1:00pm - 2:00pm | Conference registrations & lunch 

Welcome to Rotomould25! Please join us for registration and lunch in the trade exhibition area, and meet the suppliers. 

---

2:00pm - 2:05pm | Welcome to Rotomould25 | Ian Gough, President, ARMA

We officially open the conference with a welcome from our President, Ian Gough 

---

2:05pm - 2:15pm | What is happening at ARMA! | Michelle Rose, ARMA

Hear about the latest projects and developments from our CEO.

---

2:15pm - 3:15pm | It's all about your carbon footprint | Dr Robin Kent, Tangram Technology | Part One

This session provides a foundational overview of carbon footprinting, focusing on how to calculate a site’s (gate-to-gate) carbon footprint. It covers the key data required for calculations and emissions that are within a site’s management control, with brief insights into Scope 3 emissions and product carbon footprinting. The extended session offers a deep dive into site-based carbon footprinting, detailing methods for data collection, calculation, and reliable emissions factors for common activities. By the end, most sites will be able to complete their carbon footprint, with practical guidance supported by brief coverage of Scope 3 emissions and product carbon footprinting to highlight the differences in approaches. This session will continue at 4:00pm.

---

3:15pm - 3:30pm | Presentation information coming soon

---

3:30pm - 4:00pm | Coffee break

Take this opportunity to head into our tabletop exhibition area, check out the displays and get to know our suppliers, grab a healthy treat from the Rototuff Snack Bar or a coffee from Rotomachinery's Coffee Cart!

---

4:00pm - 5:00pm | It's all about your carbon footprint | Dr Robin Kent, Tangram Technology | Part Two

Join us for part two of Robin's presentation.

---

5:00pm | Conference close 

It's time to get ready for a fantastic evening ahead at tonight's Welcome Dinner sponsored by Price Plastics.

---

6:00pm | Travel to venue

Meet us in the hotel foyer for transport to our dinner venue.

---

6:30pm - 9:30pm | Price Plastics Welcome Dinner | Willie Smith's Apple Shed

Join us for an exciting start to the conference! This evening is designed to foster connections and set the tone for the entire event. Enjoy an evening filled with laughter and delicious cuisine, all while attendees network and share ideas, with thanks to Price Plastics for sponsoring this event

---

9:30pm - 10:00pm | Travel back to hotel

After a fantastic evening, we head back to the hotel to unwind and relax ahead of day two of Rotomould25!

---

 

8:30am - 9:00am | Arrival coffee

Good morning and welcome to day two of Rotomould25! Please join us for coffee thanks to Rotomachinery Group. It's time to get networking in the trade exhibition area.

---

9:00am - 9:30am | Highlights from a life in Rotomoulding | Gavin McDonnell, Eagle Rota Moulding

From a chance introduction to Polyethylene foam in 1991, a journey of innovation and growth unfolded. Gavin’s presentation highlights how an initial spark of interest led to a series of ambitious machinery development projects. What began as a deep dive into this new material quickly evolved into a learning curve that resulted in groundbreaking solutions, such as jetty floats, submersible aquarium floors, and septic waste treatment tanks. Over the years, Gavin tackled complex challenges, from military-grade naval designs to multi-layer foam technologies. With a blend of creativity, expertise, and problem-solving, he turned these obstacles into high-performance, game-changing products.

---

9:30am - 9:50am | Presentation information coming soon

---

9:50am - 10:20am | Cooling: The final frontier | Dr Gareth McDowell, 493K Limited

Cooling may be the last part of the Rotomoulding Cycle, but it is no less important than the others. In this presentation, you will understand what exactly happens in the cooling stage and how what you do at this stage can have a significant impact on your process, your parts and your profits. 

---

10:20am - 10:30am | Presentation information coming soon

---

10:30am - 11:00am | Coffee break

Head over to our tabletop exhibition area to check out the displays and introduce yourself to our suppliers, grab a snack from the Rototuff Snack Bar.

---

11:00am - 11:40am | Presentation information coming soon

---

11:40am - 12:30pm | Sustainability – it is not what you think it is | Dr Robin Kent, Tangram Technology 

Be prepared for a challenge about what you think sustainability is and what it involves. Dr Kent has written a 440-page book about Sustainability Management, but this presentation aims to change the way you think. Using data from respected sources, he challenges what industry should be doing and why their current view of sustainability is wrong. This presentation shows why their world view is wrong, why things are so much better than they believe and what they can do to get even better.

---

12:30pm - 1:30pm | Lunch break 

Join us for lunch in the trade exhibition area. Take a moment to explore the tabletop exhibition area, see the displays, and engage with our suppliers.

---

1:30pm - 2:30pm Industry Insights Panel Session

Each panellist brings a unique perspective, offering valuable insights into how different industries are adapting, innovating, and pushing the boundaries of rotomoulding.

Expect real-world case studies, technical discussions, and thought-provoking conversations that will leave you with new ideas, strategies, and a broader understanding of how rotomoulding is evolving across various markets.

---

2.30pm - 3:00pm | Presentation information coming soon

---

3:00pm - 3:30pm | Coffee break

Make the most of this opportunity to visit our tabletop exhibition area, view the displays, and connect with our suppliers.

---

3:30pm - 5:00pm | Presentation information coming soon

---

5:00pm | Conference closes for day two

It's time to get ready for yet another fantastic evening ahead at tonight's Matrix Polymers Conference Dinner.

---

7:30pm - 10:30pm | Matrix Polymers Conference Dinner

Tonight will be an intimate, yet dynamic affair, featuring focused business discussions, networking opportunities, and our prestigious awards presentation. It's the perfect platform to connect with key industry leaders, all while your brand takes centre stage. Thank you to Matrix Polymers for sponsoring this evening. 

8:30am - 09:00am | Arrival coffee

Our final day of the conference! Beat that late night tiredness and start your morning with a coffee thanks to Rotomachinery Group and networking in the trade exhibition area. Explore the business displays, and meet the faces behind our amazing suppliers.

---

9:00am - 9:45am | Energy Management in Rotomoulding | Dr Robin Kent, Tangram Technology 

This presentation provides an overview of energy management for rotational moulders, focusing on the basics of where energy is used and offering practical ‘Top Tips’ to reduce energy consumption. Dr Robin Kent will highlight simple, actionable techniques that can cut energy use by up to 30%, covering key areas such as management, reporting, processes, and machinery.

---

9:45am - 10:00am | Inside an Australian Plastic Recycle Business | Carlos Gomes, 3RG Recycling

3RG Recycling is a specialist recycling company with over 25 years of experience providing industrial-scale solutions for complex recycling challenges in Brazil, the USA, and beyond. As part of a globally established group, they have successfully implemented commercial recycling operations for CRT glass, soft plastics, offering sustainable alternatives for industries such as ceramics and packaging. Their expertise in closed-loop recycling ensures that materials are reused efficiently, reducing environmental impact and supporting a circular economy. Now, they are expanding their services to support the plastic industry by supplying high-quality recycled materials to compounders and end-users who produce their own compounds. 3RG's goal is to help businesses integrate sustainable solutions without compromising performance, providing reliable, eco-friendly alternatives tailored to their needs. With their proven track record and global presence, 3RG Recycling is ready to collaborate with industry partners to drive sustainability in rotomoulding.

---

10:00am - 10:10am | Presentation information coming soon

---

10:10am - 10:30am | Coffee break

Step into our tabletop exhibition area, check out the awesome displays, and mingle with our fantastic suppliers - and be sure to sneak a mid-morning snack from the Rototuff Snack Bar.

---

10:30am - 11:00am | In depth foam sandwich | Gavin McDonnell, Eagle Rota Moulding

Delving into the world of Foam Sandwich Systems, Gavin will outline the key steps in establishing and building foam products. This presentation covers everything from the essential equipment needed to the detailed process of foam build and layup. With insights into using foam in basic applications as well as in kiss-off systems, Gavin highlights the importance of foam density in wall construction. Practical troubleshooting tips and techniques are also shared, providing invaluable knowledge for mastering foam systems in any project.

---

11:00am - 11:30am | Taking control of part thickness in rotational moulding | Dr Gareth McDowell, 493K Limited 

Thickness Control and Recording is important in Rotational Moulding. Too much variation and your parts will not meet their design specifications in either strength or dimensions. If you take control of your thickness you may find that you are taking much better control of your rotational moulding. This presentation will help you on that path.

---

11:30am - 12:00pm | The Q Tank Story: Moving Beyond the Grind | Toby Peacock, Q Tank

Toby Peacock founder and Director of QTank shares his keys to moving from the grind to growth. As a self-confessed ‘recovering workaholic’, the balance of business and life was not sustainable and something needed to change. Toby will share an interactive session with practical foundational tools that will lead you toward a balanced, productive and sustainable future. 

---

12:00pm - 12:15pm | Conference close

Thank you all for attending Rotomould25. Your participation has been invaluable, and we look forward to seeing you at the next one!

---

12:15pm - 12:45pm | Farewell lunch 

We conclude our conference with a final lunch before everyone heads home with new learnings and connections.