Rotational Molding Machine - McNeil Akron, Fixed Arm Turret

McNeil Akron, Fixed Arm Turret - Rotational Moulding Machine.

This machine has 3 arms fixed to a central turret.

Indexing the turret from station to station results in the 3 arms moving simultaneously.

Currently fully operational.

Note: This machine is similar in operation to those currently supplied by Ferry Industries in the USA.

 

Machine was supplied from USA in the late 1970’s

Machine includes a Gas Fired Oven; around 1,000MJ.

Water assisted air cooling Chamber, and load / unload Platform.

Includes safety equipment and overhead crane.

The machine has 3 straight arms and 1 off-set arm.

Maximum mould size is 1.5M cubed.

Original Service Manual available.

 

Sale Price : Make an Offer

Access for removal available from 5 January 2026.

Successful purchaser will need to have the machine removed from factory by the end of February 2026.

Factory Address is 77 North Street, Albury NSW 2640.

Forklift available on site to help with loading.

Crane etc. if required to be supplied by purchaser.

Electricity and Gas will be disconnected from the machine.

 

More photos of the machine are available.

 

Machine can be viewed at any time.

For more information call or email Mark de Koeyer.

Mobile     +61 416 222 479
Email       mdekoeyer@seeleyinternational.com